Eliminate fires with the latest thermal release technology
Special impact fuses for high reliability
Large flow capacity, low residual pressure, fast response time
Craftsmanship, long-term work in harsh environments such as acid, alkali, dust, salt spray and humidity
Kevin wiring can be realized; the structure is rigorous, the installation is convenient, and the maintenance is simple
Use and maintenance
After the power module surge protector fails, the green indicator on the indicator window will turn red, and the protector should be replaced immediately.
In the normal use of this surge protector, especially during the thunderstorm season, the grounding system of the surge protector should be checked in time to keep it in good grounding condition, otherwise the protection effect of the surge protector will be affected to varying degrees. When the grounding wire PE is open, the surge protector will be disabled.
1 This power module surge protector can be combined according to different requirements and applied to single-phase and three-phase TT/TN/IT power supply systems to meet the protection requirements of different power systems. When installing on the 35mm rail, the Kevin is preferred. Wiring method can also be used as follows.
2 The surge protector should be installed after the fuse of the power supply line. The capacity of the fuse should not exceed 315A GL/gG. If this value is exceeded, a 315A GL/gG fuse should be added to the surge protection branch.
3 According to the logo of the protector, the wiring connection shall be as follows: the insulated copper wire with a cross-sectional area of not less than 10mm2 and the withstand voltage not lower than 500v AC, the length of the Boxian length of 13-15mm shall be as short as possible and not more than 0.5m. Meet the requirements of relevant standards.
Professional mold development and design, auto parts, surge protectors, contactors and other accessories design and production.
Packaging & Shipping
Q1:Are you manufactuiring or selling?
A1:If you want to buy a product, I am a manufacturer; if you want to serve, I am a service provider. My job is to give you the best quality on a cheap basis.
Q2:I can’t find the product on your catalogue, can you make this product for me? A2: Our catalogue shows most of our products,but not all.So just let us know what product do you need.
We have the professional enginer team which can design and develop the mold to arrive different customer nequirement.
We also have the sales team to offer good service from pre-sale to after-sale.
Q3:If I Have Custom-made Requirement, Do You Have Person To Design According To My Concept?
A3:Certainly.our design team will do for you.
Q4:How about warranty?
A4:According to the actual situation. Each product will be different warranty,please contact us.
Q5: What’s your warranty terms?
A5: We offer 12-24 months warranty time.
Q6:What is payment terms?
A6: T/T,Paypal,Western Union and L/C isacceptable.Please be sure that we can receive the same amount of the Invoice. And you can pay money In RMB. No problem.